Jump to content
Poholio

Poholio's Tusken WIP- APPROVED 11/2017

Recommended Posts

Hello,

So after hemming and hawing for too long and basically fearing taking the first steps, I have finally begun the Tusken. 

I started by accumulating a bunch of different items I'd need, like the fabrics and pieces parts for the bandoliers, etc. Got them in the mail in trickles, stored and waiting for their respective portions of the build to start. 

Many thanks to all the fine builders on this site- your prior experiences and documentation have aided tremendously in formulating a battle plan for this costume. As I want too stay as close to scratch built as I can, I dug around for other scratch builds and hit upon the thread@Contec posted. 

Big thank yous to @Arcturus1020 and @wingnut65 as well. I find myself continually referencing your posts also. 

So, armed with this great info, I set off to dig into the mask. Here are some preliminary experiments with sizing and dimensions. 

AzHXJqd.jpg

livKDnK.jpg

The snout looked really long on this attempt. Like a weird aardvark or something. The blood splitters definitely don't align correctly with the space where the tooth will be. 

I cut the snout down some, and it looks a bit better, but the spitters and tooth are still not in proper alignment. 

rK8INMb.jpg

6q6UnJF.jpg

 

I am going to continue to modify the snout, and build up the area under the eyes and spitters to see if that helps to align the pieces more accurately. In my mind the "trapezoid" configuration of the eyes, spitters, and tooth is what makes the mask look spot on, rather than just reminiscent of a Raider. 

More to come. 

Cheers!

Share this post


Link to post
Share on other sites

Well, it'd help, I suppose, if the pics appeared! Any idea how to add photos from Photobucket?  Clicking the "insert other media" button and the "insert image from URL" didn't work; the URL just turned red. Thanks!

Share this post


Link to post
Share on other sites

If the photos are on your PC click on the 'choose files' to the left of 'insert other media' and pick the photo to add.

 

Share this post


Link to post
Share on other sites

Thanks! I am using Photobucket, so you have to go into the links and choose the one for forums, etc. Hopefully the images are appearing now. 

Share this post


Link to post
Share on other sites

On other forums where you need a link I use the IMG link from Photobucket. Just click and paste.

Share this post


Link to post
Share on other sites

Had the chance to work a bit more on the mask. I cut the snout down some. I also began covering it in a layer of newspaper and masking tape. 

Yliey0h.jpg

xB0xtkB.jpg

With proof of concept eyestalk and spitter. 

aEB5O8S.jpg

hjZZzjp.jpg

The test greeblies will need adjustments in placement. The snout still seems off. I think the angle of the snout end is too acute. 

I would really like to simulate the Peter Diamond mask as much as possible. If anyone has critiques I'd be glad to hear them!

Share this post


Link to post
Share on other sites

Test fitting. 

ajnhBbQ.jpg

hC4g9uR.jpg

What I take away from this is that the cardboard face must have shifted while I added paper and tape to the structure, as the whole face seems to look downward. 

I plan on cutting material out of the sides of the crown and giving it a literal facelift.  I will readjust the jawline  accordingly.I also need to lengthen the vertical height of the snout, as it just barely gives clearance for my chin. 

I cut the snout back some, but I still think it's slightly too long. I may cut it back a hair and robe the cardboard spacer from where the spitters will sit so the spitters don't jut out too far past the snout. 

Share this post


Link to post
Share on other sites

Okay, so I disliked the angle of the face and tried to do a bit o' surgery. He didn't make it. So, I cut out the cardboard face plate and made sure to brave the face with cardboard taped to the stand. I was also more careful with measurements and I think it seems better.

Here it is with 4 layers of papier mâché:

ZjfKMjb.jpg

7AAcw5x.jpg

I left excess in the back that I will cut down when it's dry. Then I will remove the face mask from the helmet and mâché the inside with 4 layers. It's starting to look like something.:DZ:

Thanks for looking. 

  • Like 1

Share this post


Link to post
Share on other sites

Had a little time to mess around. 

Got to work on the tooth. I cut the shapes out of styrene and filled it with Bondo. 

4kFum9L.jpg

imEOwc4.jpg

I am not sure I am digging it so far. It's not sanded down much yet, but if the finished tooth leaves much to be desired, I may pick up a 2 inch wooden sphere and cut it down. 

Here's the mask with a layer if PVA and linen:

9dGrDtR.jpg

yXIMtC0.jpg

With any luck that will keep the shape nice and strong. The much was pretty good, but I want to be sure it's rugged. I will look for some ways to waterproof at least the inside against the inevitable deluge of sweat I am bound to produce in it. Anyone have any thoughts? I am thinking maybe latex house paint, or resin. 

Thanks!

Share this post


Link to post
Share on other sites

This is awesome, I love scratch builds.  Props to you my friend, keep up the good work!  Excellent job on that snout/nosepiece!

  • Like 1

Share this post


Link to post
Share on other sites

Thanks for the kind words, fellas. 

Had a pretty productive weekend. I coated the inside of the mask with plastidip, hoping it will help combat deterioration from sweat:

vB2XBKv.jpg

Not sure if this will do the trick, but it's better than nothing. 

I also got pretty far on the spitters. They are made of funnels from Walmart. I cut off the tips and then cut those in half, sticking the thinner tip into the fatter one. Then a slathering of Bondo to fill in gaps. 

4AjTgVK.jpg

Foam work out mat to hold it in place. 

r2GajcP.jpg

Added a thin strip of sintra for the lip. 

UAuLEbc.jpg

Here they are with the tooth and the beginnings of the eyestalks. The tooth I am sanding as smooth and shiny as possible, to help emulate the look of aluminum once painted. There are a few stubborn pock marks that just won't go, but hey, weathering. 

LMvzBbT.jpg

The eyes are tough! They are 1 1/4" schedule 40 PVC, heated and formed over a table leg, blah, blah, blah..you guys know the drill. The sight slots are really hard to get clean- I will need to Bondo it all up to get sharper lines. 

L9EzKXz.jpg

9LOBQl5.jpg

That's all for now. Thanks for looking. 

Share this post


Link to post
Share on other sites


Moving forward, trying to complete the helmet this month:

tkfs8GM.jpg

I dyed the snout wraps with Fishings Medium Brown. Wow, that's dark! Fortunately, a little bending and sanding brings it to a respectable worn brown. 

Here are the head spikes, made from cut-down shaker pegs from A.C. Moore:

JEuL2Dv.jpg


Here are the screws and styrene washers to hold them on:
ys5JfiZ.jpg

The greeblies all hit with a couple coats of aluminum spray:

B36Dbk4.jpg

Planning on sanding this smooth and adding a few more coats. 

Here's the beginnings of the rebreather, made from a larger-sized tomato paste can. The conical ends are cut from plastic break fluid cans, Gooped on. 

rcg3pih.jpg

The caps are the caps from Walmart brand vegetable oil:

rtisUx3.jpg

Comments and critiques welcome!

 

 

  • Like 1

Share this post


Link to post
Share on other sites

Okay, this may seem like a bone-headed question. I would like to include the cut outs on the sides of the eyestalks to add visibility, as so many have done before. I like the idea of having them included, since if I decide to sacrifice visibility for accuracy, I can always cover them up. The question is, what kind of mesh/screen are folks using for this purpose? Likewise, what is the best material for the screening behind the eye holes and mouth? Just plain old window screening, or something fancier?

Share this post


Link to post
Share on other sites

Made some progress over the last few weeks. Going slower than I hoped, but still, progress is progress. 

Snout puckery leather on. This was far more difficult than I anticipated. I must have spent an hour fussing with it.

fL7F3KD.jpg


Rubber bands and tape keep everything together, just like in life. 

NLPsCRw.jpg



Preliminary tusk testing. They will need to be positioned more accurately. 

yVjXWdS.jpg

Actually starting to look like something. 

79pseJJ.jpg
LOYpEhw.jpg
Here's the rebreather in progress. I hit it with a few coats of aluminum spray paint and weathered it with black, brown, and yellow ochre acrylics.

jhocmG5.jpg 7RAq8CX.jpg

I had a leftover piece of vinyl that fit the rebreather perfectly. It looked really nice ( forgot to get pics!) But I laid it on with e6000, and for whatever reason, the cement dried underneath and held it on, but some seeped through the crappy vinyl and never dried. It left the exterior surface sticky and attracted every piece of dust and lint in three counties. So off it came. Will be picking up vinyl for the bandoliers when Joann's has a good sal and I'm thinking I'll use some of it to cover the rebreather. 

Cheers!

Share this post


Link to post
Share on other sites

It's been a while, but I am nearing completion on this build. I hope to have it done for a costume party next week. 

Since the Photobucket fiasco I kind of felt a lack of desire to do as much documentation of the build, and as a result I took barely any pics of its progress. 

I decided to switch over to imgur and I went back through this thread and updated all the links, so hopefully the pics show up again. 

Anyway, here are a few pics I took over the last few months of the build, as a preview. 

This was my first rough attempt at the head wraps. They are khaki duck cloth, and this mock up made me realize this fellow's forehead was too short. I ended up adding some strips of foam mat to give it some height. 

9g9m9DJ.jpg

Here is a more finished view, with the foam build up of the forehead. 

mNMzbsS.jpg

iGUVZAQ.jpg

I will add more pics of the finished pieces as I take them and get some of the full suit as well. 

Share this post


Link to post
Share on other sites

Snapped some pics of the suit components, with and without flash. 

MVe4tSq.jpg

l8gDU9h.jpg

AnvF49k.jpg

qiNsNDy.jpg

M5iAf2v.jpg

0IFSmVj.jpg

BT7cf9J.jpg

The Martini Henry and Ottoman follow in the footsteps of Arcturus and Bcarp. They're made it the good vinyl at Joann's.  The waist pouches are made of crappy Walmart beige vinyl. There is craft foam backing the flaps and scraps of Sintra glued in the sides for rigidity. 

Mk0ZRql.jpg

A2QT6aX.jpg

ldgC2yO.jpg

5rfIzvj.jpg

DgwzKOO.jpg

The boots are made from cheap Croc style shoes and a pair of khakis cut off and glued on for the legs.  They Velcro down the inside of the leg and the seam is hidden with small flaps overlapping and a ribbon of duck to wrap around the leg.

oCFlF5L.jpg

F5D3LhF.jpg

nc10lW4.jpg

The neck is closed with Velcro.

pFXoZv2.jpg

The robes have been dyed and the inner robe assembled. Still need to sew up the outer and do some weathering. 

qwN2OgJ.jpg

Still not happy with the amount of weathering on the mask, so I'll probably dirty it up more. Still need to make the gaffi as well, likely using a variation on HappyTrooper's awesome build. Thanks for looking. 

Share this post


Link to post
Share on other sites

Received Legion approval! 

DZ 78059 now entering the sandbox.  

7GorXnv.jpg

3wG4zEG.jpg

6rJed8K.jpg

778kuam.jpg

HTyHj58.jpg

ztWAEEH.jpg

I know- there's a loose wrap hanging from the chin- it's fixed!

Big thanks to all those whose prior work and trial and error served as a roadmap for me during this build.

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×