Krayt Clan Members
  • Content count

  • Joined

  • Last visited

  • Days Won


Darthman last won the day on April 13 2014

Darthman had the most liked content!

Community Reputation

29 Excellent

About Darthman

  • Rank
    Advanced Member

Profile Information

  • Gender
    Not Telling
  • Occupation
  • Location:

501st Information

  • 501st ID
  • Name

Recent Profile Visitors

263 profile views
  1. I used the e6000 on the inside the mouth area. Wrapped it with a rubber band and lite it sit overnight Sent from my SM-N920T using Tapatalk
  2. Lots of hot glue! Sent from my SM-N920T using Tapatalk
  3. Looks like you forgot the raised rib that runs around the center. I hated building my breather, worst part of the whole build. Sent from my SM-N920T using Tapatalk
  4. Oh yeah, that was it. Couldn't remember. Sent from my SM-N920T using Tapatalk
  5. I believe if you have two bandos, across the chest, you don't need to wear the outer robe. Good option for hot days. Sent from my SM-N920T using Tapatalk
  6. This build has recently struck my interest, damn it!
  7. Good luck man. Need any help, just shout Sent from my SM-N920T using Tapatalk
  8. I used a brown long sleeve shirt, stuffed the sleeves with towels and glued the wraps to the sleeves. Lots of hot glue! I started at the top, little above the elbow. Wrapped all the way to the wrist and left a 12"-18" "tail". After I get my gloves on, I wrap the "tail" around the top of the glove to cover the elastic part. Then just tuck the end under a few times, or you could use a safety pin as well. Works well, looks good, no wrapping every time. Sent from my SM-N920T using Tapatalk
  9. Do you happen to have the contact info for the supplier you used?
  10. Yes trapezoids, not diamonds.
  11. Osnaburg for the inner robe, Monks Cloth for the outer. Wash and dry before cutting anything!! Monks cloth shrinks a ton, make sure u buy extra.
  12. That's the one I bought. Very stiff and tons of dye. I soaked it in a tub of water for a few days. Pulled it out and rubbed it all over the driveway, scrathed it up nice. I let it dry for a day or two and used black and brown paint to weather it. Turned out nice, still a bit stiff but not a big deal
  13. I'm all good! DZ44200 is a wrap. On to the next build haha!!
  14. Needed to make it more dirty and my breather hung too low. Resubmitted tonight.